CY7C65113
Field Programmable Gate Arrays
Storage Temperature ..............................................................–65°C to +150℃
Ambient Temperature with Power Applied...................................... 0°C to +70℃
Supply voltage on VCC relative to VSS............................................–0.5V to +7.0V
DC Input Voltage......................................... .........................–0.5V to +VCC+ 0.5V
DC Voltage applied to Outputs in High Z State ....................–0.5V to +VCC + 0.5V
Power Dissipation ......................................................................................500 mW
Static Discharge Voltage ...........................................................................> 2000V
Latch-up Current .................................................................................... > 200 mA
Max Output Sink Current into Port 0, 1, 2, 3 ................................................ 60 mA
Max Output Sink Current into DAC[7:2] Pins................................................. 10 mA
Max Output Source Current from Port 1, 2, 3, 4, 5, 6, 7 ............................. 30 mA
• USB hub with an integrated microcontroller
• 8-bit USB optimized microcontroller
—Harvard architecture
—6-MHz external clock source
—12-MHz internal CPU clock
—48-MHz internal hub clock
• Internal memory
—256 bytes of RAM
—8 KB of PROM
• Integrated Master/Slave I2C-compatible Controller (100 kHz) enabled through General-purpose I/O (GPIO) pins
•I/O ports
—Three GPIO ports (Port 0 to 2) capable of sinking 7 mA per pin (typical)
—An additional GPIO port (Port 3) capable of sinking 12 mA per pin (typical) for high current requirements: LEDs
—Higher current drive achievable by connecting multiple GPIO pins together to drive a common output
—Each GPIO port can be configured as inputs with internal pull-ups or open drain outputs or traditional CMOSoutputs
—Maskable interrupts on all I/O pins
• 12-bit free-running timer with one microsecond clock ticks
• Watchdog timer (WDT)
• Internal Power-on Reset (POR)
• USB Specification compliance
—Conforms to USB Specification, Version 1.1
—Conforms to USB HID Specification, Version 1.1
—Supports one or two device addresses with up to 5 user-configured endpoints
Up to two 8-byte control endpoints
Up to four 8-byte data endpoints
Up to two 32-byte data endpoints
—Integrated USB transceivers
—Supports seven (CY7C65013) or four (CY7C65113) downstream USB ports
—GPIO pins can provide individual power control outputs for each downstream USB port
—GPIO pins can provide individual port over current inputs for each downstream USB port
• Improved output drivers to reduce electromagnetic interference (EMI)
• Operating voltage from 4.0V to 5.5V DC
• Operating temperature from 0° to 70℃ CY7C65013 available in 48-pin PDIP (．PC) or 48-pin SSOP (．PVC) packages
• CY7C65113 available in 28-pin SOIC (．SC) or 28-pin PDIP (．PC) packages
• Industry-standard programmer support.
|
