HDSP-078x
These standard solid state displays have a 7.4 mm (0.29 inch) dot matrix character and an on-board IC with data memory latch/decoder and LED drivers in a glass/ceramic package.
The hermetic HDSP-078x,-079x/-088x displays utilize a solder glass frit seal. The HDSP-098X displays utilize an epoxy glass-to-ceramic seal.
The numeric devices decode posi-tive BCD logic into characters "0-9", a "-" sign, decimal p and a test pattern. The hexadecimal devices decode
positive BCD logic into 16 characters, "0-9, A-F" An input provided on the hexadecimal devices to blank the display (all LEDS off) without losing the contents of the memory.
The over range device displays "±1" and right hand decima point and is typically driven via external switching transistors.
| Description |
Symbol |
Min. |
Max. |
Unit |
Storage Temperature, Ambient
HDSP-078x/-079x/-088x |
TS |
-65 |
+125 |
℃ |
| HDSP-098x |
-55 |
+100 |
Operating Temperature, Ambient[1]
|
TA |
-55 |
+100 |
℃ |
| Supply Voltage[2] |
VCC |
-0.5 |
+7.0 |
V |
| Voltage Applied to Input Logic, dp and Enable Pins |
VI, VDP , VE |
-0.5 |
VCC |
V |
Voltage Applied to Blanking Input[2]
|
VR |
-0.5 |
VCC |
V |
Wave Solder Temperature at 1.59 mm (0.063 inch)
below Body, max. 3 seconds |
|
|
250 |
℃ | Three Character Options Numeric, Hexadecimal, Over Range
Three Colors High Efficiency Red, Yellow,High Performance Green
4x7 Dot Matrix Character
High Efficiency Red, Yellow and High Performance Green
Two High Efficiency Red Options Low Power, High Brightness
Performance Guaranteed Over Temperature
High Temperature Stabilized
Memory Latch/Decoder/Driver
TTL Compatible
Categorized for Luminous Intensity
| HDS-035 |
Miniature Aluminum Electrolytic Capacitors |
HDS0810E |
TV microcontrollers with Closed Captioning (CC) and On-Screen Display (OSD) |
| HDS-0810E |
SILICON PNP TRANSISTOR |
HDS0820 |
4 Megabit (512 K x 8-Bit/256 K x 16-Bit) CMOS 5.0 Volt-only Boot Sector Flash Memory |
| HDS-0820 |
8-, 10-,12-Bit Video Speed Hybrid Current & Voltage Out D/A Converter |
HDS-0820M |
PULSE-WIDTH-MODULATION CONTROL CIRCUIT |
| HDS-0820MB |
Low voltage operation is more suitable to be used on battery backup, portable electronic |
HDS-100AH |
OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS |
| HDS1015E |
|
HDS-1015E |
8-Bit CMOS Microcontrollers with A/D Converter |
| HDS-1015EMB |
256M bits DDR SDRAM |
HDS-1020 |
UProcessor Supervisory |
| HDS-1025 |
8-, 10-,12-Bit Video Speed Hybrid Current & Voltage Out D/A Converter |
HDS-1025M |
SURFACE MOUNT SILICON ZENER DIODES |
| HDS-1025MB |
|
HDS-1205TM |
Three-Terminal Low Current Negative Voltage Regulators |
| HDS-1240 |
512 Kbit / 1 Mbit / 2 Mbit (x8) Many-Time Programmable Flash |
HDS1240E |
Low Voltage Differential SCSI LVD 27 Line Regulator Set |
| HDS-1240E |
TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER |
HDS-1240E4 |
SOLID TANTALUM CHIP CAPACITORS |
|
