TDA1311A
Stereo Continuous Calibration DAC CC-DAC

Part Number:
Quantity:
Country/Region:
Email:
Description:
Code:
For complete your requirements, please fill in the part number,quantity and other contact details. So that more suppliers will contact you.
  Supplier Information Part Number Mfg Pack D/C Description Inquire

The TDA1311A; AT is a voltage-driven digital-to-analog converter and is new generation of DAC devices which embodies the innovative technique of Continuous Calibration (CC). The largest bit-currents are repeatedly generated by one single current reference source. This duplication is based upon an internal charge storage principle which has an accuracy insensitive to ageing, temperature matching and process variations.

The TDA1311A; AT is fabricated in a 1.0 mm CMOS process and features an extremely low-power dissipation, small package size and easy application. Furthermore, the accuracy of the intrinsic high coarse-current combined with the implemented symmetrical offset decoding method preclude zero-crossing distortion and ensures high quality audio reproduction. Therefore, the CC-DAC is eminently suitable for use in (portable) digital audio equipment.

SYMBOL PARAMETER CONDITIONS MIN. MIN. UNIT
VP positive supply voltage - 6.0 V
Txtal(max) maximum crystal temperature -55 +150 °C
Tstg storage temperature - +150 °C
Tamb operating ambient temperature -40 +85 °C
Ves electrostatic handling note 1 -2000 +2000 V
note 2 -200 +200 V

Note
1. Human body model: C = 100 pF, R = 1500 Ω, 3 pulses positive and 3 pulses negative.
2. Machine model: C = 200 pF, L = 0.5 mH, R = 10 Ω, 3 pulses positive and 3 pulses negative.

· Voltage output
· Space saving packages SO8 or DIP8
· Low power consumption
· Wide dynamic range (16-bit resolution)
· Continuous Calibration (CC) concept
· Easy application:
  – single 4 to 5.5 V rail supply
  – output current and bias current are proportional to the supply voltage
  – integrated current-to-voltage converter
· Fast settling time permits 2, 4 and 8 × oversampling (serial input) or double-speed operation at 4 × oversampling
· Internal bias current ensures maximum dynamic range
· Wide operating temperature range (-40 °C to +85 °C)
· Compatible with most current Japanese input formats: time multiplexed, two’s complement, TTL
· No zero-crossing distortion
· Cost efficient.

TDA 6060G 8-Bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and USART TDA 1311A CMOS 0 to 44 MHz Single-Chip 8 Bit Microcontroller
TDA 16846 14PSMD SIEM 50 Watt Zener Diodes TDA 5030 A SUBMINIATURE HIGH POWER RELAY
TDA 5100 B2 Up/Down Counting Meter TDA 8433 16Kbit, 8Kbit, 4Kbit, 2Kbit and 1Kbit Serial I2C Bus EEPROM
TDA 9111 TDA 9302H 24-Stage Frequency Divider
TDA B5 6060XS SEVEN DARLINGTON ARRAYS TDA001GM 128 Mbit, 256 Mbit, 512 Mbit, 1 Gbit (x8/x16) 528 Byte/264 Word Page, 1.8V/3V, NAND Flash Memories
TDA001GM-TRM High-Current Switching Applications TDA002 Surface Mount Aluminum Electrolytic Capacitors
TDA005BB 3.3V 32K/64K x 16/18 Dual-Port Static RAM TDA0124 LOW POWER J-FET QUAD OPERATIONAL AMPLIFIERS
TDA0124FP Dual N-Channel Enhancement Mode Field Effect Transistor TDA0126 Miniature Aluminum Electrolytic Capacitors
TDA014B TDA0160
TDA0160CM High Voltage Chip Divider TDA0160FP

Datasheet

Size: 133.34KB
Page: 20
PDF: TDA1311A.pdf
  • Description:
    Stereo Continuous Calibration DAC CC-DAC
  • MFG:
    PHILIPS [Philips Semiconductors]
 

Abstract


DATA SHEET
Preliminary specification
Supersedes data of July 1993
File under Integrated Circuits, IC01
1995 Dec 18
INTEGRATED CIRCUITS
TDA1311A
Stereo Continuous Calibration DAC
(CC-DAC)

Stock Index : 0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  All  
About Us  |  Contact us   |  Map  |  Link   |  Custom PCB Prototype Manufacturer
© 2008-2011 TradeOfic.com Corp.All Rights Reserved.